JUKI SC-956, Инструкция по эксплуатации

Страница: 152 / 185

– 147 –
1. With some combinations of stitch length,
direction of feed and sewing speed,
the sewing machine may fail to finish a
sewing pattern exactly according to the
settings.
2. Needle cannot be entered to the same
needle entry point when the stitch length
is set to 0.0 mm.
<Sewing screen (Maintenance personnel mode)>
9-4. Custom patterns
It is possible to register 20 patterns consisting of groups
of two or more different stitches as custom patterns.
Each group can contain 10 steps at the maximum.
As many as 100 stitches of the same stitch length can
be set in one step.
* This operation is to be carried out under the
maintenance personnel mode.
9-4-1. Selecting the custom pattern
Custom patterns that you have created can be selected.
The custom patterns can be used for pattern sewing, reverse feed stitching at the beginning of sewing
and reverse feed stitching at the end of sewing.
In this paragraph, a custom pattern is applied to a sewing pattern as an example.
①
Displaying the stitch length input screen
1) Press ❶ on the sewing screen
under the maintenance personnel
mode.
The "sewing data edit screen" is dis-
played.
<Figure: Example of the custom pattern>
Step1
1mm 3 stitches
Step2
2mm 2 stitches
Step3
3mm 1 stitches
Step4
1.5mm 2 stitches
Step1
1mm 3 stitches
One cycle of a
custom pattern
Next cycle
❶