JUKI SC-956, Инструкция по эксплуатации

Страница: 101 / 185

– 96 –
6) Correction value [%] to be employed when maximum sewing speed at 200 sti/min can be set by
pressing . This value can be increased / decreased with .
When the pedal is depressed to select , it is possible to perform sewing at the maximum
sewing speed of 200 sti/min using the sewing conditions; needle thread tensions (right and left)
, stitch length and presser foot pressure .
7) Correction value [%] to be employed when maximum sewing speed at 1000 sti/min can be set by
pressing .
As in the case of 6), the sewing machine is able to perform sewing at the maximum sewing speed
of 1000 sti/min.
8) When is selected, the correction value [%] to be employed when maximum sewing speed at
2000 sti/min can be set.
As in the case of 6), the sewing machine is able to perform sewing at the maximum sewing speed
2000 sti/min.
9) When is selected, a correction value [%] for sewing speedset with U044 "Max. sewing speed
position" can be set.
As in the case of 6), the sewing machine is able to perform sewing at the maximum sewing speed
set with U044 "Max. sewing speed position".
10) The aforementioned result of settings can be checked on thread tension chart .
11) Set values through can be reset to the initial value of 100 by pressing .
12) ❾ is disabled during sewing. After the completion of thread trimming, it becomes enabled and
can be pressed to return the screen to the "S079 Needle thread tension correction screen".
5) The values of needle thread tensions
(right and left) , stitch
length and presser foot
pressure can be increased /
decreased with .
* Needle thread tension (left, right)
set in the aforementioned procedure
is used for setting the correction chart.
It is not reflected to the needle thread
tension that can be set in the sewing
pattern data.
❾