JUKI SC-956, Инструкция по эксплуатации

Страница: 82 / 185

– 77 –
5-5. List of memory switch data
No. Item Setting range Unit
U001 Soft-start function
The initial value differs with the machine head. (0: OFF)
0 to 9 Stitch
U007 Bobbin thread count-down unit
0: 10 stitches / 1: 15 stitches / 2: 20 stitches
0 to 2 Stitch
U013 Bobbin thread count stop function
0: Sewing machine start prohibition function is disabled even when the counter
completes counting (negative value).
1: When the counter completes counting, the sewing machine start after thread
trimming is prohibited.
2: When the counter completes counting, the sewing machine temporarily
stops and the start of sewing machine after thread trimming is prohibited.
* Note that the prohibition function is disabled in the case the initial value of
counter is 0 (zero).
0 to 2 -
U014 Sewing count function
1: Automatic sewing counter / 2: Sewing counter switch input
1 to 2 -
U021 Presser foot lift when the pedal is in its neutral position
0: Disabled / 1: Enabled / 2: Enabled only when the presser foot is at its lower
position / 3: Alternating vertical movement by depressing the back part of pedal
0 to 3 -
U025 Operation after manual turning (thread trimming)
This memory switch is used for setting the thread trimmer operation after the
sewing machine has moved from its upper/lower stop position by manual turn-
ing of handwheel.
0: Permitted / 1: Prohibited
0 to 1 -
U030
Middle-of-sewing reverse feed stitching function
Midpoint-of-sewing reverse feed stitching function is set.
0: Without the midpoint-of-sewing reverse feed stitching function / 1: With the
midpoint-of-sewing reverse feed stitching function
0 to 1 -
U031 Number of stitches of middle-of-sewing reverse feed stitching
Number of midpoint-of-sewing reverse feed stitches is set.
1 to 19 Stitch
U032
Condition of enabling middle-of-sewing reverse feed stitching while sew -
ing machine is at rest
Midpoint-of-sewing reverse feed stitching function enable condition
0: Disabled when the swing machine is at rest / 1: Enabled when the sewing
machine is at rest
0 to 1 -
U033 Thread trimming activated by middle-of-sewing reverse feed stitching
Thread trimming function after the completion of midpoint-of-sewing reverse
feed stitching is set.
0: Without automatic thread trimming function / 1: With automatic thread trim-
ming function
0 to 1 -
U035
Minimum speed of the pedal
The initial value varies with the machine head.
150 to 250 sti/min
U036 Thread trimming sewing speed
The initial value varies with the machine head.
100 to 250 sti/min