JUKI SC-910N, Руководство инженера

Страница: 8 / 94

– 4 –
4. EXPLANATION OF OPERATION PANEL
(1) List of operation panels of CP-170
No. Description
Power indication LED : Lights up when the power switch is turned ON.
Max. speed limit variable resister : Maximum speed is limited when this resister is moved in the left direction ( ).
Pattern selector switch : Used for selecting a pattern from among the four different patterns.
Automatic double reverse stitching at the start of sewing switch : Used for turning ON / OFF the automatic double reverse stitching at the start of sewing.
Automatic double reverse stitching at the end of sewing switch : Used for turning ON / OFF the automatic double reverse stitching at the end of sewing.
Automatic reverse stitching at the start of sewing switch : Used for turning ON / OFF the automatic reverse stitching at the start of sewing.
Automatic reverse stitching at the end of sewing switch : Used for turning ON / OFF the automatic reverse stitching at the end of sewing.
Switches for setting the number of stitches : Used for setting the number of stitches to be sewn in processes A through D.
Material edge sensor ON / OFF switch : Rendered effective when the material edge sensor is installed on the machine.
Used for setting whether or not the material edge sensor is used during sewing.
One-shot automatic stitching switch : Rendered effective when the material edge sensor is installed on the machine or when the sewing
machine is operated under the constant-dimension stitching mode. Start the sewing machine with this switch, and the sewing machine will run
automatically until the material edge is detected or the end of a constant-dimension stitching is reached.
Automatic thread trimming switch : Rendered effective when the material edge sensor is installed on the machine or when the sewing
machine is operated under the constant-dimension stitching mode. Even keep depressing the front part of the pedal, the sensor can detect the
material edge, or after the completion of the constant-dimension stitching mode, the machine will automatically perform thread trimming.
Bobbin thread counter : Indicates the amount of bobbin thread while counting it by subtracting from the set value.
Bobbin thread counter/thread trimming counter : Bobbin thread counter/thread trimming counter can be changed over by the
function of the control box main body.
Bobbin thread counter : Indicates the amount detecting device is installed on the machine, the counter indicates the number of times
of detecting.
Thread trimming counter : Every time thread trimming is performed, the counter value is added.
Bobbin counter reset switch : Used for returning the value shown on the bobbin thread counter to the initial value.
Bobbin thread amount setting switch : Used for setting the amount of bobbin thread.
Needle bar stop position changeover function to be available when the needle up/down compensating switch/pedal is in
neutral state.
Needle up/down compensating switch : This switch is used for each needle up/down compensating stitching.
[Changeover selection of needle bar stop position when the pedal is in its neutral position]
Pressing the needle up/down compensation switch, turn ON the power to the machine, and the needle bar stop position when the pedal
is in its neutral position is changed over to down position/up position.
Confirmation of the stop position can be performed at the front cover of the control box.
When up position stop is specified : “ nP UP “
When down stop position is specified : “ nP Lo “
Function setting switch
Pressing the function setting switch, turn ON the power to the machine, and it is possible to change the various function setting
values. The case is the same as the control panel of the front of the control box.