– 44 –
1
Soft start
The number of stitches to be sewn at a low speed when the
U
0 to 9
52
function
soft-start function is used at the start of sewing.
(Stitches)
2
Material end
Material end sensor function (used in case of without panel).
U
0/1
52
sensor
0 : Material end detection function is not operative
function
1 : After detecting material end, the specified number of
stitches (No. 4) will be sewn, and the sewing machine
will stop.
3
Thread trimming
Thread trimming function by material end sensor (used in case of
U
0/1
52
function by
without panel).
material end
0 : Automatic thread trimming function after detection of
material end is not operative.
1 : After detecting the material end, sewing will be carried
out for the specified number of stitches (No. 4) and
the sewing machine will then stop.
4
Number of
Number of stitches for material end sensor (used in case of
U
0 to 19
52
stitches for
without panel). Number of stitches from detection of material
(Stitches)
material end
end to stop of the sewing machine.
sensor
5
Flicker reducing
Flicker reducing function (If the hand lamp flickers).
U
0 to 8
52
function
0 : Flicker reducing function is not operative.
1 : Less effective . 8 : Highly effective
6
Bobbin thread
Bobbin thread counting function
U
0/1
52
counting
0 : Bobbin thread counting function is not operative.
53
function
1 : Bobbin thread counting function is operative.
7
Unit of bobbin
Unit of bobbin thread counting down
U
0 to 2
thread counting
0 : Count/10 stitches
down
1 : Count/15 stitches
2 : Count/20 stitches
8
Number of
Sewing speed of reverse feed stitching
U
150 to 3000
rotation of
(rpm)
reverse feed
stitching
9
Thread
Thread trimming prohibiting function (used in case of
U
0/1
52
trimming
without panel).
prohibiting
0 : Thread trimming prohibiting function is not operative.
function
1 : Thread trimming is prohibited.
(Output of solenoid is prohibited. : Thread trimmer and
wiper)
10
Setting of
Position of needle bar is specified when the sewing
U
0/1
52
needle bar
machine stops.
stop position
0 : Predetermined lowest position
when the sewing
1 : Predetermined highest position
machine stops.
11
Click sound of
Click sound of key switch mounted on PSC is specified.
U
0/1
53
key switch
0 : Click is not operative.
mounted on
1 : Click is operative.
PSC
12
Optinal switch
Switching of function of optional switch.
U
0 to 8
53
function
0 : No function
selection
1 : Needle up/down compensating stitching
2 : Back compensating stitching
3 : Function of canceling once reverse feed stitching at the
end of sewing
4 : Thread trimming function
5 : Presser foot lifting function
6 : One stitch compensating stitching
7 : Function of simultaneously canceling reverse feed
stitching at the
start and end of sewing
8 : Neutral presser lifting changeover function
13
Function of
Function of prohibiting start of the sewing machine by bobbin
U
0 to 2
62
prohibiting
thread counting
start of the
0 : When counting is out (-1 or less) Function of
sewing
prohibiting start of the sewing machine is not operative.
machine by
1 : When counting is out (-1 or less) Function of prohibiting
bobbin thread
start of the sewing machine is operative.
counter
2 : When counting is out (-1 or less) Function of forcibly
prohibiting start of the sewing machine is operative.
(9) Function setting list (Start level ; U : User’s mode, S : Service mode)
No.
Item
Description
Start level Setting range
1
0
2
0
3
0
4
5
5
0
6
1
7
0
8
0
0
9
1
9
0
0
1
0
1
1
1
2
1
0
3
1
0
Indication of
function setting
Ref.
page
Содержание SC-910N
Страница 1: ...40063908 No E381 00 ENGINEER S MANUAL SC 910N...
Страница 88: ...84 MEMO...
Страница 91: ...87 3 IP 110 operation panel block diagram TM...
