JUKI SC-910N, Руководство инженера

Страница: 65 / 94

– 61 –
ddddd
Retry function (Function setting No. 73)
When the retry function is used, if the sewing material is thick and not piereced with needle, this function makes
the needle pierce in the material with ease.
0 : Normal
1 : Retry function is provided.
fffff
Function to select the start-up speed of the sewing machine (Function setting No. 76)
This function is selected in the case where the speed of the sewing machine is desired to be more at the time of
start-up. (Time required to start is shortened by approximately 10%.)
0 : Normal curve
1 : More sharp curve
(Caution) If “1” is set, motor may move irregularly. In addition, noise may occur when the sewing ma-
chine is running or noise may increase when the sewing machine is running.
ggggg
Presser foot lifting solenoid suction time setting (Function setting No. 84)
Suction time of presser foot lifting solenoid can be changed. When heating is great, it is effective to lessen the
value.
(Caution) When the value is excessively small, malfunction will be caused. So, be careful when chang-
ing the value.
Setting range : 40 to 300ms <10ms>
hhhhh
Function of pedal curve selection (Function setting No. 87)
This function can perform the selection of the curve of number of rotation of the sewing machine against the
depressing amount of the pedal.
Change to this function when you feel that inching operation is hard or that pedal response is slow.
0 : Number of rotation of the sewing
machine in terms of the depressing
amount of the pedal increases lin-
early.
1 : Reaction to intermediate speed in
terms of the depressing amount of
the pedal is delayed.
2 : Reaction to intermediate speed in
terms of the depressing amount of
the pedal is advanced.
jjjjj
Function of upper position stop shortly after Power ON (Function setting No. 90)
Effective/ineffective of automatic return to UP stop position immediately after turning ON the power can be set.
0 : Ineffective
1 : Effective
kkkkk
Function added to the needle up / down compensating switch (Function setting No. 93)
One stitch operation can be performed only when the needle up / down compensating switch is pressed at the
time of upper stop immediately after turning ON the power switch or upper stop immediately after thread trim-
ming.
0 : Normal (Only needle up / down compensating stitching operation)
1 : One stitch compensating stitching operation (upper stop . upper stop) is per-
formed only when aforementioned changeover is made.
lllll
Continuous sti one shot stitching nonstop function (Function setting No. 94)
In IP-110 program functions, this is a function that does not stop the sewing machine at the last of a step and
proceeds to the next step when performing sewing by combining continuous stitching with one shot stitching.
Select this function when you desire to execute the overlapped stitching of 19 stitches or more.
0 : Normal (Stop when a step has completed.)
1 : The sewing machine proceeds to next step without stopping after a step has
completed.
;;;;;
Setting of max. number of rotation of the sewing machine head (Function setting No. 96)
his function can set the max. number of rotation of the sewing machine head you desire to use.
Upper limit of the set value varies in accordance with the sewing machine head to be connected.
50 to Max. [rpm] <50 / rpm>
Number of rotation (rpm)
Pedal stroke (mm)
0
1
2
3 7
1
6 7
0
4 8 0 0 1
7 8 0
0 9 1
3 9
0
4 9
0
6 4 9
0 0 0