JUKI MS-1261A-DWS, Инструкция по эксплуатации

Страница: 33 / 77

– 30 –
⑤ State the sewing machine runs on the multi-layered section of material
Setting of the sewing data to be used from the time
at which a multi-layered section of material is detect-
ed to the time at which the the presser foot of the
sewing machine completely runs on the multi-lay-
ered section is carried out.
State display on the operation panel:
The following data items are used.
S012 Multi-layered section sewing speed
S005 Presser foot pressure
S016 Cloth puller pressure when the presser foot runs on the multi-layered section
S015 Cloth pulling amount when the presser foot runs on the multi-layered section
S011 Multi-layered section changeover ON sensor value
S013 Number of stitches when the presser foot runs on the multi-layered section
After the sewing machine completes sewing of "S013 The number of stitches to be sewn when running on
the multi-layered section" in the "state of the sewing machine runs of the multi-layered section of material",
the sewing state shifts to the "state of sewing the multi-layered section of material".
Set "S013 Number of stitches to be sewn when running on the multi-layered section" according to the length
and shape of the multi-layered section of material.
⑥
State of sewing the multi-layered section of material
S012 Multi-layered section sewing speed
S018 Presser foot pressure for sewing the
multi-layered section
S020 Cloth puller pressure for sewing the multi-lay-
ered section
S019 Cloth pulling amount for sewing the multi-lay-
ered section
S017 The number of stitches to be sewn on the
multi-layered section
S021 Multi-layered section changeover OFF sen-
sor value
Setting of the sewing data to be used after the press-
er foot of the sewing machine completely runs on the
the multi-layered section of material is carried out.
State display on the operation panel:
The following data items are used.