JUKI APW-895NE, Инструкция по эксплуатации

Страница: 78 / 256

− 62 −
②
Level 2
Memory switch data (level 2) are the motion data that the sewing machine has in common and the data
that operate on all sewing patterns in common. The data are for the maintenance personnel and possi
-
ble to edit by pressing the mode switch as long as 6 seconds.
No. Item
Setting range
/
Edit unit
Initial value
Marking light mounting
Mounting/Non-mounting of marking light is selected. When “Non
mounting” is selected, marking light does not work.
- - -
Non mounting Mounting
Sewing position selection
Mode that surely ends sewing at rear reference position, mode that
surely starts sewing from front reference position or the conventional
motion mode that changes sewing position according to the setting of
is selected.
* Front reference position : 80 mm from needle
Rear reference position : 300 mm from needle
For the long and wide type, it is 330 mm.
However, when is set, it is 380 mm.
- - -
Conventional mo-
tion mode
Sewing position
fixed mode (Rear
reference)
Sewing position
fixed mode (Front
reference)
Setting of solenoid valve for corner knife separate drive
Mounting/non mounting of solenoid valve for corner knife separate
drive is set.
- - -
Non mounting Mounting
Pedal operation mode change-over
Mode to be used for foot pedal is set.
- - -
7-step pedal mode 1-shot pedal mode
Excess rate of center knife cutting
Excess rate in terms of the speed of revolution of center knife can be set.
300 to 500
/
1%
350%