JUKI APW-895NE, Инструкция по эксплуатации

Страница: 45 / 256

− 29 −
(1) Input screen (Independent sewing mode)
3. EXPLANATION OF THE BASIC SCREEN
U
V
Symbol Name of button Description
A NEW CREATION button Independent sewing pattern new creation screen is displayed and new register of the pattern
data can be performed.
B
COPY button Independent sewing copy source pattern list screen is displayed and the pattern can be copied.
C
CHARACTER INPUT button Character input screen is displayed and the name can be inputted to the pattern data.
D
TYPE OF WELT CHANGE-OVER button Type of welt change-over screen is displayed, and change-over of type of welt and adjust -
ment of parallelism of the binder can be performed.
E CLAMP UP PROHIBITION AT SEWING END
button
When this button is pressed, the clamp is returned in the lowered state at sewing end.
It is convenient to use this button at the time of adjusting the marking light or trial sewing.
F
NEEDLE THREAD TRIMMING button When this button is pressed, needle thread trimming knife comes down and the needle
thread trimming operating screen is displayed.
G
BOBBIN THREAD TRIMMING button Bobbin thread trimming knife opens while this button is pressed.
H
PATTERN NO. LIST button Pattern No. list screen is displayed and the pattern data can be selected.
I
SEWING MODE CHANGE-OVER button Sewing mode is selected.
J
L SIZE LENGTH SETTING button In case of L size sewing, sewing length is set.
K
MOTION MODE SETTING button With/without of motion of sewing machine motor, center knife and corner knife.
L
STACKER MOTION/STOP CHANGE-OVER button This button selects motion/stop and of stacker.
M SEWING DATA DISPLAY button Sewing pattern edit screen is displayed. Detailed sewing data that are not displayed in the
input screen can be selected and edited.
N
PATTERN NAME display Names that are inputted in pattern Nos. are displayed.
O CORNER KNIFE MOTION POSITION AT
SEWING START SETTING button
Cutting position of corner knife at sewing start is set.
P CENTER KNIFE SETTING button Center knife data edit screen is displayed, and center knife cutting position of sewing start
and sewing end is set.
Q
CORNER KNIFE MOTION POSITION AT
SEWING END SETTING button
Cutting position of corner knife at sewing end is set.
R MARKING LIGHT SETTING button
Sewing baseline can be selected by changing to the conventional operation mode.
(It should be noted, however, the marking light can only be adjusted manually.)
S
CLAMP FOOT MOVE button Clamp foot is moved to the front or to the back.
T SEWING DATA SHORTCUT button Shortcut buttons (max. 4 items) of the sewing data that are set in customizing in the sewing
screen are displayed.
U FLAP DROP DATA AT SEWING START SET -
TING button
Flap concealed stitching data at sewing start or is set.
V
FLAP DROP DATA AT SEWING END SET -
TING button
Flap concealed stitching data at sewing end or is set.
* It is possible to customize display/non-display of the respective buttons.
For the details, refer to
"VI-12. CUSTOMIZING THE DATA INPUT SCREEN" p. 73
.
O
P
Q
S
A B C D E F
H
J
M
I
L
K
R
T
N
G