JUKI APW-895NE, Инструкция по эксплуатации

Страница: 37 / 256

− 21 −
9. ADJUSTING THE CUTTING WIDTH OF CORNER KNIVES
❷
❶
A
Scale
Corner knife
on the fixed side
Loosen setscrew ❶ . Adjust the cutting width of cor -
ner knives by aligning ridge line A of the corner knife
on the moving side with the scale mark correspond-
ing to the cutting width you want to select. Then,
tighten the setscrew.
1. After the adjustment, check to make
sure that corner knife ❷ on the mov-
ing side does not fluctuate laterally.
2. When drawing out the corner knives,
move corner knife
❷
on the moving
side to its initial position before re-
leasing the toggle clamp.
If the corner knives are drawn out
while the corner knife on the moving
side does not rest at its initial po-
sition, corner knife
❷ and the table
can come in contact with each other,
resulting in breakage of the corner
knife.