JUKI APW-895NE, Инструкция по эксплуатации

Страница: 77 / 256

− 61 −
No. Item
Setting range
/
Edit unit
Initial value
Flap stopper position
In case of flap sewing, sewing start irradiation position of marking light
(distance from needle)is set
* Setting is only the irradiation position of marking light. Actual sewing
position is the flap end position detected by the flap sensor.
80.0 to
280.0
/
0.1mm
80.0mm
△
Stacker timer 5
Sets the waiting time of the stacker from the start of material grasping
operation to the release of the material
This setting is available when "Grasping stacker (optional)" is used.
0.00 - 9.99/
0.01 sec
1.00 sec
Stacker timer 6
Sets the duration of operating the oscillating arm
This setting is available when "Grasping stacker (optional)" is used.
0.00 - 9.99/
0.01 sec
1.50 sec
Setting the corner-knife fixing distance
The distance provided between the corner knife on the moving side and
that on the fixed side is set.
In the case "Mount" is set for the item
"Setting of solenoid valve
for separately-driving the corner knife", the clamp foot travels so that
the sewing starting position aligns with the position of the corner knife
on the moving side.
35.0 to
220.0
/
0.1mm
100.0mm
Number of stitches of grease-up
Number of stitches of sewing machine motion after replenishing grease
is indicated.
* When pressing CLEAR button, number of stitches is cleared to “0”.
Be sure to clear after replenishing grease.
- - - - - -
Language selection
Language to be indicated in the panel is selected.
- - - No selection
Japanese English
Chinese (traditional) Chinese (simplified)
Spanish Italian
French German
Portuguese Portuguese
Vietnamese Korean
Indonesian Russian
※
. . . Item that is not displayed due to other setting state
△
. . . . The item which is not used in the standard condition of the APW-895NE.