– 85 –
3-2. operation of cP-20 (Basic)
(1) Item data setting
Set each tem followng the procedure descrbed below.
3
setting of the X scale (Example : when setting 100.0%)
1) Press the
key to ndcate the tem “X
Scale” .
2) Press
or
key, and set the rato
wthn the range of 1.0% to 400.0%.
setting of
the X scale
setting of
the Y scale
setting of
the max.
sewing speed
limitation
setting
the thread
tension
setting of
intermediate
presser height
setting of the
pattern no.
1
turn on the power switch.
Pattern No. of the tem selecton lghts up, and the pattern No. s ndcated on the data dsplay.
2
setting of the pattern no. (Example : when setting pattern no. s.61)
1) Press the
key to ndcate the tem “Pat-
tern NO” .
2) Press the
or
key to ndcate “ S.61
”on the dsplay.
Be sure to use the smart media that has been formatted with IP-400.
For the formatting procedure of the smart media, refer to
"
@
-2-26. Performing formatting of the media" p.83.
Store the vector format data to the specified folder referring to
"
@
-1-3) Folder structure of the media" p.26
.
Properly nsert the smart meda and securely close the ld of the cover.
h
h
