– 70 –
2-24. using information
There are three functons below n the nformaton functon.
1) Oil replacement (grease-up) time, needle replacement time, cleaning time, etc. can be specified
and the warning notice can be performed after the lapse of the specified time.
Refer to
"
@
-2-24.(1) observing the maintenance and inspection information" p.70
.
2) Speed can be checked at a glance and the target achevng conscousness as a lne or group s
ncreased as well by the functon to dsplay the target output and the actual output.
Refer to
"
@
-2-24.(3) observing the production control information" p.72
and
"
@
-2-24.(4) Performing setting of the production control information" p.74
.
3) Informaton on machne workng rato, ptch tme, machne tme and machne speed can be
dsplayed from the workng state of the sewng machne.
Refer to
"
@
-2-24.(5) observing the working measurement information" p.76
.
(1) observing the maintenance and inspection information
1
Display the information screen.
When nformaton key
A
of the swtch seat secton s
pressed n the data nput screen, the nformaton screen s
dsplayed.
2
Display the maintenance and inspection information
screen.
Press mantenance and nspecton nformaton screen dsplay
button
B
n the nformaton screen.
A
B
