Judo 8203040, Инструкция по установке и эксплуатации

Страница: 25 / 40

JUDO i-soft@home 25
Operation
5.7.3 Setting the limit values
Press the key 1x and then

2x. The
display shows the following:
Press key <OK> 1x and then key

as often
as necessary, until the display indicates the
following:
Press <OK> 2x. The display shows the fol-
lowing:
After selection of the desired limit value

or

and pressing the key <OK> the limit
value can be increased or reduced with key

or

and then permanently saved with
the <OK> key. In this context the following
settings are possible:
If you scroll beyond the lowest settable val-
ue, the indication 'unlimited' appears on the
display. Note the following upon saving this
setting:
If one of the limit values is deactivated
(“unlimited” setting), this value is no
longer monitored. If for example the max-
imum drawing time is deactivated, then a
small leak can only be detected by the
leak protection system when the maxi-
mum water volume set for another limit
value is reached.
The limit values must be set according to the
respective consumption habits. If under the
normal consumption habits a limit value is
regularly exceeded without a leak being pre-
sent, the corresponding limit value can be
reset to a larger value.
Typical adjustment values for a private
household
Main menu
• Settings
Setting
• Leakage alarm
Limit values
• Flow rate
Limit value
lowest settable value default value
(factory setting)
highest settable val-
ue
step size
max. flow
500 l/h 4000 l/h
5000 l/h,
unlimited
500 l/h
max. water
volume
100 l 300 l
3000 l
unlimited
100 l
max. drawing
time
10 min 30 min
10 h,
unlimited
10 min
Example
Single fami-
ly dwelling,
2 persons,
no flushing
valves Single fami-
ly dwelling,
4 persons,
no flushing
valves Single fami-
ly dwelling,
4 persons,
2 flushing
valves
Max. flow
2000 l/h 2000 l/h 5000 l/h
Max. wa-
ter volume
300 l 500 l 500 l
Max. draw-
ing time
30 min 60 min 60 min
Drawing time is not monitored
during softener regeneration.