KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
19
Trenches, hillocks and other obstacles shall be crossed by tractors with mounted implements
at the right angle, at a low gear, avoiding sharp pounding and large rolls of the tractor.
IT IS PROHIBITED
to travel on trailing implements and mounted machines not designed for
this purpose, and outside the tractor cabin.
Trailing implements and trailers shall have rigid couplers preventing their infall on the tractor.
In case of tractor disconnection from trailing implements or trailers, first disconnect the
pneumatic systems and electrical equipment.
Only those persons who are aware of the rules of work with trailers, semi-trailers and other
vehicles should be admitted to work with them.
When hooking up trailers and semi-trailers, connect their safety chains to the connecting
links located on the lifting nuts of the linkage braces.
When using the tractor in hauling operations, it is necessary to take the following precau-
tions:
execute works with the “Road-train” sign being switched on;
check reliability of the pneumatic system operation;
pay special attention to the choice of travel speed with the account of road conditions,
radiuses of turn, visibility, features and condition of vehicles and the load being con-
veyed;
when operating the tractor on snowy, overmoistened and other roads with a low ad-
hesion coefficient as well as on slopes, turns, hillsides, glaze ice, etc., travel at low
gears, do not admit abrupt braking and turning;
when moving on roads with a low adhesion coefficient, it is recommended to drive the
tractor train “stretched out” - to this end, brake the hooked-up vehicle first by means
of the hand brake valve 17, Fig.14, and then use the tractor service brakes;
in case of occurrence of a danger for driving, take measures to decrease the speed
and stop the road-train;