KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
120
REMEMBER!
When hooking up the tractor with trailing agricultural machines to be
connected by means of hitch iron, the horizontal struts in the transverse plane shall
be adjusted for movement by 150-200 mm. When transporting the above-mentioned
machines, lower links of the linkage shall be fully locked against transverse move-
ments by horizontal struts.
6.6 PROCEDURE OF OPERATION WITH AGRICULTURAL MACHINES
(IMPLEMENTS) AND VEHICLES
6.6.1 Procedure of operation with mounted and semi-mounted agricultural machines
(implements)
When hooking up mounted and semi-mounted agricultural machines and implements, fulfill
the following rules:
a) lower and lift agricultural machines and implements only when the tractor moves
directly;
b) avoid turns of the tractor with agricultural machines (implements) whose operating
parts are in soil.
d) in order to avoid failures of 28,1R-26 tyres, it is not recommended to perform haul-
ing of K-744R1 tractors with heavy mounted implements at the speed over 10 km/h.
REMEMBER!
Turning a machine with landed operating parts can lead to an accident.
c) during operation of the tractor unit
IT IS PROHIBITED
to set the hydraulic distribu-
tor handles into position FORCED LOWERING for the operating position of agricul-
tural machines (implements).
When transporting an agricultural machine or implement, their operating parts shall be in the
transport position and the hydraulic distributor handles shall be in position NEUTRAL.
REMEMBER!
When hooking up the tractor with mounted and semi-mounted agricul-
tural machines to be connected to three or two points of the linkage, the length of hor-
izontal struts shall be adjusted so as to have rear hinge pivots of lower links of the
linkage freely moving in the transverse plane by 150-200 mm.
The final adjustment and setting of agricultural machines and implements shall be carried out
in the field (in case of plowing - at passing the third furrow; in case of other operations - at
the first passage).