JRC JMR-5400 Series, Инструкция по эксплуатации

Страница: 91 / 206

5-5 Section 5 Route monitoring
5
5.2.2 Configuring [Settings] - [Route] from the
menu
Procedure
Use the following operation to display the [Route] dialogue in the Edit pane of the [Settings] dialogue.
[Menu] button
→ Settings → Route
The following table lists the setting items of the [Route] dialogue.
Setting item Description Setting value
[Route Mode]
combo box
Select a route type.
Plotter: Uses the destination route.
NMEA: Uses the NMEA destination display feature.
When [NMEA] is selected, all the other setting items
of this dialogue are disabled.
Plotter / NMEA
[WPT Switching
Mode] combo box
Set whether To WPT is switched automatically or
manually.
AUTO: To WPT is switched automatically.
Manual: To WPT is switched manually.
With [AUTO] selected, when the ship enters the
arrival circle of the To WPT, the next WPT will be the
To WPT. [AUTO] works only if [Alert Type] is set to
[Arrival] in the [Alert] menu (see 6.3.1 Configuring the
alerts for the destination route).
AUTO / Manual
[Save Temporary
Route] check box When it is checked, the temporal/GoTo route is saved
even after the power supply is turned off. Enabled: Checked
Disabled: Unchecked