JRC JMA-9172-SA, Инструкция по эксплуатации

Страница: 81 / 486

JMA-9172-SA Instruction Manual
>
2.CONTROL PANEL KEYS and SOFTWARE BUTTONS
>
2.3 FUNCTIONS OF SOFTWARE
BUTTONS
2 － 21
2
Mark color / line color switching
This function switches a mark color / line color. If this button is clicked while the cursor
mode is
(mark) or (line), the mark color / line color is
changed.
Cursor bearing numeric value display true / relative switching
The bearing numeric value display (true bearing) / (relative bearing) of the
cursor is switched whenever this button is clicked.
, , and EBL1 / 2 and VRM1 / 2 adjustment
These functions set the EBL1 , VRM1 , EBL2 , and VRM2 displays to On / Off and
acquire the operation right.
If the button is clicked on, the operation right is acquired. Make adjustments by moving
the track ball to the left and right Determine the adjustment by left-clicking.
and EBL1, EBL2 numeric value true / relative switching
The EBL1 / 2 bearing numeric value display (true bearing) / (relative
bearing) is switched whenever the button is clicked.
If the button is clicked for 2 seconds, the EBL / Cursor Setting menu is displayed.
and EBL1 / EBL2 starting point mode switching
The EBL starting point is set to CCRP or any position on the radar screen whenever this
button is clicked.
⇒ ⇒ ⇒
Parallel index line setting
This function sets the parallel index line display to On / Off and acquires the operation
right.
If this button is clicked, the operation right is acquired and the menu is opened. After
setting, determine the setting by left-clicking.
： Center
The starting point is fixed to the CCRP position.
：
Screen Fix
The starting point is set to the cursor position. If left-
clicked subsequently, the starting position is fixed to
the cursor position.
：
L/L Fix
i
i. is enabled only when a navigator is connected.
The starting point is set to the cursor position. If
left-clicked subsequently, the starting position is
fixed to the latitude / longitude of the cursor.
(Connection of a navigator is necessary.) If the
starting point is moved outside of the screen, the
operation is reset automatically and the starting
point returns to the CCRP position.
3
□
- - - - - - -
4
T R
5 6 7 8
9 10
T R
11 12
_ C D _
_
C
D
D
13