JRC JMA-9172-SA, Инструкция по эксплуатации

Страница: 434 / 486

A
－
6
JMA-9172-SA Instruction Manual
>
A.NQE-3141 Interswitch Unit
>
A.2 INTERSWITCH OPERATION
b. Display unit connected as master
c. Display unit connected as slave
If this button is clicked, select / cancel the display unit.
If this button is clicked in the naming a display unit or scanner unit mode , the name input
window is opened .
d.
Name
If this button is clicked, set to the display or scanner unit rename mode.
e. File Operations
If this button is clicked, the File Operations menu is opened.
。
f.
Set
If this button is clicked, the change of connection is determined.
g.
Exit
If this button is clicked, the Inter Switch Menu is closed .
A.2.3 Change of Connection Pattern (with 2 Display Units)
If two display units are installed, a connection pattern needs to be selected.
Procedures
1) Open the Inter Switch menu (with 2 Display Units).
2)
Move the cursor onto the Connection pattern
(see Section A.2.2 "Inter
Switch Menu" and Section a. "Connection pattern")
to be changed , and left-click.
The connection pattern will be selected, and (Section b. "Set") will blink.
3) Left-click the button.
The connection pattern will be changed.
3. Set
3. Set