manualshive.com logo in svg

JRC JMA-9172-SA, Инструкция по эксплуатации

Поделиться
Скачать
JRC JMA-9172-SA Скачать руководство пользователя страница 205

JMA-9172-SA Instruction Manual

 > 

3.BASIC OPERATION

 > 

3.8  APPLIED OPERATIONS

3

－

109

3

3.8.8.4

Wind Graph Setting 
•

The Wind Graph Setting menu will appear.

[1]

Wind Graph Display

•

Determine whether to display received wind direction/velocity information 
with a graph.

•

One of two digital information areas is used to display data.

•

When the wind direction / speed graph is displayed, the sizes of the target 
tracking (TT) / AIS numeric data display areas are exclusively decreased.

•

Left-click the 

 button located at thelower righit of the display. The 

wind direction / speed graph display function is switched between On and Off.

[2]

Wind Speed Unit

•

Set the unit of wind velocity for the wind direction / speed graph.

3.8.8.5

TEMP Graph Setting 
•

The TEMP Graph Setting menu will appear.

[1]

TEMP Graph Display

•

Determine whether to display the graph of the water-temperature data that has 
been received on the radar display.

•

One of two digital information areas is used to display data.

•

When the water-temperature graph is displayed, the sizes of the target tracking 
(TT)/AIS numeric data display areas are exclusively decreased.

: The fathom is used as the unit of water depth.

: The meter is used as the unit of water depth.

: Does not display the wind direction / speed graph.

: Displays the wind direction / speed graph in digital information area 1.

: Displays the wind direction / speed graph in digital information area 2.

: Meters per second are used as the unit of wind speed.

: Kirometers per hour are used as the unit of wind speed.

: Knots are used as the unit of wind speed.

Fathom

Meters

Target

Off

Area1

Area2

m/s

km/h

kn

Содержание JMA-9172-SA







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды