manualshive.com logo in svg

JRC JMA-9172-SA, Инструкция по эксплуатации

Поделиться
Скачать
JRC JMA-9172-SA Скачать руководство пользователя страница 190

3

－

94

JMA-9172-SA Instruction Manual

 > 

3.BASIC OPERATION

 > 

3.8  APPLIED OPERATIONS

3.8.1.2

Video Noise Rejection
•

This function rejects signals that assumed as noise and clutter in radar videos.

•

Select 

 to display radar videos like analog signals.

•

Select  

 or 

  to suppress noise and clutter.

 

3.8.1.3

Auto Dynamic Range
•

When the automatic sea clutter suppression mode and the automatic rain/snow 
clutter suppression mode are in use, the dynamic range is automatically 
controlled.

•

When the automatic sea clutter suppression mode is in use, this function 
improves gain by widening the dynamic range of only areas where sea clutter 
is strong and narrowing the dynamic range of areas where sea clutter is not 
detected.

•

When the automatic rain/snow clutter suppression mode is in use, this function 
improves gain by widening the dynamic range of areas where sea clutter and 
rain/snow clutter are strong and narrowing the dynamic range of the other 
areas.

•

Land videos become obscure when the automatic rain/snow clutter suppression 
mode is in use.

：

Turns off the noise rejection function, and displays all
signals. Targets are popped up from noise and displayed
like analog signals.

 

：

Rejects the signals of definitely unwanted waves (noise and
clutter). When detection of targets or unwanted waves is not
definite, the signals are displayed.

 

：

Rejects the signals of definitely unwanted waves (noise and
clutter). When detection of targets or unwanted waves is not
definite, the signals are rejected. Only when detection of
targets is definite, the signals are displayed.

 

：

Does not control the dynamic range automatically.
(Standard setting) The dynamic range is set in the same
manner as when the manual sea clutter suppression mode
or the manual rain/snow clutter suppression mode is in use.

 

：

Automatically controls the dynamic range.

Off

Level1

Level2

Off

Level1

Level2

Off

On

Содержание JMA-9172-SA







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды