JRC JMA-9172-SA, Инструкция по эксплуатации

Страница: 221 / 486

JMA-9172-SA Instruction Manual
>
3.BASIC OPERATION
>
3.11 USING CARD
3 － 125
3
3.11.1.2 Load Information from Card to Internal Portion (Copy Card ->
Internal)
Procedures
1) While the File Manager window is open, left-click the device 1
selection button.
Selected items for Device1 will be displayed.
2) Left-click the button among the selection items.
Internal is selected.
3) Left-click the device 2 selection button.
Selected items for Device2 will be displayed.
4) Left-click button corresponding to the device in which data to be
loaded is saved.
The list of files saved in the selected device will be displayed.
5) Select the desired data.
Left-click button one more time will cancel the selection.
6)
Left-click the button.
Confirmation Window will appear.
7) Left-click the button to overwrite data, or Left-click
the button to add new data.
When Overwrite is selected, internally saved data is deleted and new data is loaded. When
Add is selected, new data is added to the saved data.
8) Left-click the button.
The selected file is loaded into the system from the card.
When adding data saved on the card to the data saved in the system, data can be copied from
multiple files. However, when the maximum number of units of data is reached, additional
data cannot be loaded. Even in the ADD mode, WPT data and Route data are overwritten.
1. Internal
COPY
1. Overwrite
2. Add
1. Yes