manualshive.com logo in svg

JRC JMA-9172-SA, Инструкция по эксплуатации

Поделиться
Скачать
JRC JMA-9172-SA Скачать руководство пользователя страница 283

JMA-9172-SA Instruction Manual

 > 

5.OPERATION OF TARGET TRACKING AND AIS

 > 

5.3  AIS OPERATION

5

－

31

5

Procedures

1)

Open the Message menu by performing the following menu 
operation.

→

 

 

2)

Left-click  

or .

Addressed messages list or broadcast messages list are displayed.

Each list shows ship names and message-received time.

For an unread message, 

 is displayed to the left of the item number.

3)

Left-click the item button to display the message.

The message will appear.

[2]

Displaying Specified Target's Message

Procedures

1)

Display AIS target information.

If there are messages from the target, a message mark will be displayed in the Digital 
Information located at the center right of the display.

2)

Left-click the unread message display button in the Digital 
Information located at the center right of the display.

The message will appear.

 

[3]

Deleting Message (Delete)

Procedures

1)

Left-click 

  while the message is displayed.

The Confirmation Window will appear.

2)

Left-click 

 to delete the message.

The message will be deleted, and the ship name and message-received time will disappear 
from the list.

AIS

9. TT Test Menu

Addressed Message

Broadcast Message

*

1. Delete

1. Yes

Содержание JMA-9172-SA







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды