manualshive.com logo in svg

JRC JMA-9172-SA, Инструкция по эксплуатации

Поделиться
Скачать
JRC JMA-9172-SA Скачать руководство пользователя страница 289

JMA-9172-SA Instruction Manual

 > 

5.OPERATION OF TARGET TRACKING AND AIS

 > 

5.3  AIS OPERATION

5

－

37

5

5.3.9

Setting Conditions for AIS Alarm (AIS Alarm Setting)

Conditions for issuing a Lost alarm and CPA/TCPA alarm for AIS targets can be 
set.

5.3.9.1

Setting of Condition for Lost Alarm

Procedures

1)

Open the AIS Alarm Setting menu by performing the following 
menu operation.

→

 

2)

Left-click the item button of 

.

The setting items for Lost Alarm will be displayed.

3)

Left-click the item button corresponding to the condition to be 
set.

5.3.9.2

Setting of Condition for CPA/TCPA Alarm

Procedures

1)

Open the AIS Alarm Setting menu by performing the following 
menu operation.

→

 

2)

Left-click the item button of 

.

The setting items for CPA/TCPA Alarm is switched.

: A lost alarm is not issued.

i

i. A lost alarm is not issued for sleeping AIS targets.

: A lost alarm is issued only for AIS targets for which a dangerous
target alarm has been issued.

: A lost alarm is issued only for activated AIS targets and AIS
targets for which a dangerous target alarm has been issued.

: A lost alarm is issued only for activated AIS targets, data
indicated AIS targets and AIS targets for which a dangerous
target alarm has been issued.

: A CPA/TCPA alarm is not issued.

i

i. When the Lost Alarm menu set to Off, the CPA ring color changes to dark color.

: A CPA/TCPA alarm is issued only for activated AIS targets.

: A CPA/TCPA alarm is issued for all AIS targets on the radar
display. 

AIS

6. AIS Alarm Setting

1. Lost Alarm

Off

Danger

ACT&Danger

ACT&Danger&Select

AIS

6. AIS Alarm Setting

CPA/TCPA Alarm

Off

ACT

ACT&Sleep

Содержание JMA-9172-SA







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды