JRC JMA-3400 Series Скачать руководство пользователя страница 279

Страница: 279 / 314

231

Chapter 13 SPECIFICATIONS

30) Interface

DVI port

DVI-D 1 port. SVGA (800

600 pixel)

GPS port

1 port

Can be used as a JRC GPS port or NMEA0183 (NMEA4 TX/RX)

port. Compatible with IEC61162-1/2 equivalent when used as

NMEA0183 port.

NMEA0183 port 3 ports (NMEA1 to NMEA3 TX/RX)

Compatible with IEC61162-1/2 equivalent

LAN port

1 port. Communication between JMA-3400 and display unit.

Dry contact output

Output the external alarms. Normally Open only.

Contact input

Input the event marks.

CHART CARD port

Support for new pec and Na charts.

USB port

2 ports (front/rear).

Front port: Save internal data.

Rear port: For mouse / trackball connection only.

31) Waterproof/dustproof

IP55. However, the following usage conditions are

assumed.

The front “CHART CARD/USB” cover is closed.

Close the “USB, LAN, DVI” cover on the back.

The optional rubber cap (MTT317838) is attached to the

cable connected to the “SCANNER” connector on the

back.

32)

EMC IEC60945

Ed.4.0

However, this is not applicable if any of the following ports

are used.

࣭

"CHART CARD/USB" port on the front.

࣭

"USB, DVI" port on the back.

13.6.2 OPERATIONAL PART

1) Structure

Integrated on the display unit

2) POWER ON/OFF

ON: [STBY]

OFF: Press [STBY] and [TX / PRF] simultaneously

3) Pointing device

Cross key

4) Keys

ENT, CLR, MENU, FUNC, USER1, USER2, EBL, VRM,

TX/PRF, STBY

5) Controls

GAIN, SEA, RAIN, BRILL, MULTI

Содержание JMA-3400 Series



























































































































































































































































































































Результаты поиска

Содержание JMA-3400 Series

Отзывы:

JRC JMA-3400 Series, Инструкция по эксплуатации, Страница: 279 / 314

Результаты поиска

Содержание JMA-3400 Series

Отзывы: