JRC JMA-3400 Series Скачать руководство пользователя страница 131

Страница: 131 / 314

Chapter 5 VARIOUS FUNCTIONS

5.15 CURSOR FUNCTION

Information on the cross cursor can be displayed on the screen.

࣭

Distance and direction from own ship to cursor position

࣭

Latitude and longitude of the cursor position

࣭

Arrival time to current cursor position

The cursor function is OFF in the initial state.

Refer to “8.9.3 OPERATION NUMERIC DISPLAY” for the setting method.

Note:

It is recommended to set this function after the Numeric Display (4).

The Numeric Display (0) to (3) have been used for another function in the initial state. If change those

settings, the speed display and coordinate position display may not be displayed.

Содержание JMA-3400 Series



























































































































































































































































































































Результаты поиска

Содержание JMA-3400 Series

Отзывы:

JRC JMA-3400 Series, Инструкция по эксплуатации, Страница: 131 / 314

Результаты поиска

Содержание JMA-3400 Series

Отзывы: