JRC JMA-3400 Series Скачать руководство пользователя страница 119

Страница: 119 / 314

Chapter 5 VARIOUS FUNCTIONS

5.8 OFF-CENTER FUNCTION

The own ship's display position can be moved to any point within 66% of the screen radius.

*The screen radius means the observation range.

The position setting is registered in advance in the MULTI control menu.

Therefore, the position can be changed quickly according to the purpose.

The registered position settings are as follows.

࣭

Right 44%

࣭

Left 44%

࣭

Backward 44%

࣭

Backward 66%

࣭

Reference:

In the Main Menu, the off-center position can be set to other positions.

Refer to “5.22 OFF-CENTER SETTING” for detailed setting method.

If select the "Previous" from the MULTI control menu, the position even where set in "5.22 OFF-

CENTER SETTING" can be set.

Procedures

5.9 MARK FUNCTION

Marks can be indicated at any positions on the screen.

A mark created on the screen holds the latitude and longitude.

Make Mark

Press

Cursor shape changes.

A mark can be put.

Содержание JMA-3400 Series



























































































































































































































































































































Результаты поиска

Содержание JMA-3400 Series

Отзывы:

JRC JMA-3400 Series, Инструкция по эксплуатации, Страница: 119 / 314

Результаты поиска

Содержание JMA-3400 Series

Отзывы: