JRC JHS-182 -, Инструкция по эксплуатации

Страница: 68 / 98

5-47
・
The registered setup can be seen when the Jog Dial is rotated. Only the saved number of
data is displayed.
・
The CHANNEL SETTING display is displayed when the CLR key is pressed on the screen
①
and
②
states as the cursor is on the numbers.
・
The cursor moves onto [EXIT] in the small window when the item is selected by Jog Dial
from the screen
①
and
②
states.
・
If [EXIT] is selected, the cursor returns to the state of Screen
②
.
・
If [CHECK] is selected, the transponder outputs the command of the contents. (See
5.3.4.3.1.)
・
When the result is NG, the contents are displayed on the last line.
（
See 5.3.4.3.1
）
・
When the result is OK, the setting can be saved after [SAVE] is selected. (See 5.3.4.3.1)
・
If [SAVE] is selected, the transponder outputs the command of the contents. (See 5.3.4.3.2.)
・
If [ERASE] is selected, the selected contents are erased and then the cursor moves onto
[EXIT].
・
If there are any data which are saved after erased data, all of the data put upward.