JRC JHS-182 -, Инструкция по эксплуатации

Страница: 78 / 98

5-57
5.3.5.3. ALARM HISTORY
When 3.ALARM HISTORY is selected from Maintenance Menu (5.3.5), ALARM HISTORY screen
appears.
This screen displays a history of alarms which occur while the
power is on. It displays the alarm history from the most recent one
maximum 20 lines. If the history consists of more than 20 lines, the
lines after 21st line will be displayed on the next screens.
If there is no more information to be displayed on the next screen,
[SCROLL] is not selectable. ( ▼ does not appear either.)
If CLR key is pressed, the procedure goes back to “Maintenance
Menu.
Alarm History Screen
ALARM HISTORY UTC11:44
BRG : RNG
NAME / MMSI
270°: 0.18NM
35°: 0.29NM
* 22°: 0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU
1.04/05/21 12:31 035,A,A
no valid ROT information
2.04/05/21 12:31 032,A,A
Heading lost/invalid
3.04/05/21 12:31 030,A,A
no valid COG information
4.04/05/21 12:31 029,A,A
no valid SOG information
5.04/05/21 10:10 001,A,V
Not Transmitting Tx malf
unction
6.04/05/21 09:33 001,A,V
Antenna VSWR exceeds lim
▼
Alarm NO. Text of the Alarm The contents of unusual detection
001 Not Transmitting TX maｌfunction Unusual detection at the transmission.
002 Antenna VSWR exceeds limit Unusual detection of antenna output.
003 Rx channel 1 malfunction Unusual detection of Rx channel 1.
004 Rx channel 2 malfunction Unusual detection of Rx channel 2
005 Rx channel 70 malfunction Unusual detection of DSC.
006 General failure Detected a general failure
008 MKD connection lost Detected the connection between AIS and
TRANSPONDER is lost.
025 External EPFS lost No information of sensor position from outside.
026 No sensor position in use No information of sensor position.
029 No valid SOG information No information of SOG.
030 No valid COG information No information of COG.
032 Heading lost/invalid No information of HEADING.
035 No valid ROT information No information of ROT.
051 TX power down Detected TX power is down.
052 TX power supply error Unusual detection of TX power supply.
053 Power supply error Unusual detection of power supply.
055 Pa temp error Detected the PA temperature is warming up.
056 TX power low Detected the TX power is lower.
057 Vr error Unusual detection of TX output.
060 TX pll unlock Detected the TX PLL is unlocked.
061 Not TX Detected the TX is not outputting.
062 Program Flash memory err Unusual detection of check sum in the TOM with
CPU.
063 Data Flash memory err Unusual detection of check sum in the other ROM.
064 MKD connection lost No serial input from the transponder.（detected
by AIS）
065 SSD mismatch Mismatch static information between transponder
and AIS.
Alarm Table