JRC JHS-182 -, Инструкция по эксплуатации

Страница: 71 / 98

5-50
5.3.4.7 CHANGING THE CHANNEL
In case, a user want to change a channel, select 7.CHANNEL SETTING
After that, type in password from Password Input Screen(
①
) and the proper password is entered,
go to Next screen(
②
)
① ②
1. Entering Password
For creating password which consists of 4 digit, using
『
A
〜
9
』
by the Jog Dial.
Enter 4 digits and finally confirm by pressing the Jog Dial, then the cursor jumps to [EXIT].
Select [EXIT], and return to SETUP
Select [ENT], and proceed to Changing Channel Screen.
2. Changing Channel
Enter channel number and select the width.
In Changing Channel screen, bring the cursor on 1.
①
On 1. , press the Jog Dial for confirming and bring the cursor to the Channel number
(in the picture above, channel numbers are 2087 and 2088)
②
See 5.0.2. for entering numeric values
③
The channels that can be chosen at this moment are acceptable. But numbers besides
registered channel number is specified, then the contents are discarded and the
cursor jumps to the channel number entry area.
④
As to the Channel Number, see
『
command list;
』
⑤
If the Jog Dial is pressed at the right edge of the channel number input area, the
cursor moves to WIDE.
⑥
The width can be selected from: a) WIDE, b) NARROW
⑦
Select the width and press the Jog Dial, the cursor jumps to the next item
.
The setting procedure for 2 is same as the procedure for 1.
When the setting for 2 has completed or while the cursor is over 2, if the Jog Dial is rotated to left,
the cursor moves down to [EXIT].
1. If [EXIT] is selected, discard the contents and return to SETUP screen.
2. If [ENT] is selected, output a command and return to SETUP screen.
CHANNEL SETTING UTC11:44
BRG : RNG
NAME / MMSI
270°: 0.18NM
35°: 0.29NM
* 22°: 0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU
PASSWORD :
* * * *
ABCDEFGHIJKLMNOP
QRSTU
V WXYZ. 0123
456789 [ ]̲
“
#$%&
’
()?@+-*/^,:;<=>!
[EXIT]
[ENT]
CHANNEL SETTING UTC11:44
BRG : RNG
NAME / MMSI
270°: 0.18NM
35°: 0.29NM
* 22°: 0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU
1 .CH A : 2087 WIDE
2.CH B : 2088 WIDE
[EXIT] [ENT]
CHANNEL SETTING screen
PASSWORD input