JR X9303 Скачать руководство пользователя страница 7

Страница: 7 / 48

TRANSFER A MODEL FROM THE X9303 2.4 – (Transfer function) – To Send

TRANSFER – TRANSFER THE MODEL TO ANOTHER TRANSMITTER OR TO DATASAFE

H-7

1. Hold the ENT button while plugging the trainer

cord into the back of the transmitter to obtain the

SYSTEM Menu. Plug the other end of the trainer

cord into another X9303 2.4 or XP9303 transmitter

while holding the ENT button down and prepare that

transmitter for Receive as described below. Or, plug the

other end of the trainer cord into a DataSafe unit and

prepare the DataSafe for Receive.

2. Highlight and select TRANSFER in the SYSTEM Menu

to obtain the Transfer display.

3. The model to be transferred must be the currently

selected model. If the model to be transferred is not

currently selected, see Model SEL in the SYSTEM

Menu to select the model to be transferred to another

X9303 2.4, XP9303 or DataSafe unit.

The TRANSFER function can be found in the SYSTEM

Menu and is used to copy the contents of a model

memory to another X9303 2.4, XP9303 transmitter or

to a DataSafe device on a Personal Computer (PC). It is

also used to receive data for a model, either from another

X9303 2.4, XP9303 transmitter or from a DataSafe unit.

4. When the receiving device is ready, press the CLR

button next to START on the left side of the display.

The data for the currently selected model is transferred

to the receiving device.

[TRANSFER]

TRANSMIT

MODEL 3 HELI

Connect DSC & POWER off

Содержание X9303

















































Результаты поиска

Содержание X9303

Отзывы:

Бренды по названию

Популярные бренды

JR X9303, Руководство пользователя

Результаты поиска

Содержание X9303

Отзывы:

Бренды по названию

Популярные бренды