CCPM Exponential (EXP)
H-19
The purpose of this exponential is to remove the non-
linear, or rough movement of the swashplate due to the
mechanical differential of the servo horn.
This will be a help to change circular movement of servo
horn to linear movement. The Exponential function can be
turned on and off by highlighting the EXP function with
the Rolling Selector, then pressing the Rolling Selector to
select INH (Off) or ACT (On). Note: it is recommended that
EXP be activated in most cases.
Accessing the Swashplate Mixing Function
1. Place the transmitter power switch in the ON position.
2. Access the
Function Mode
by pressing the
LIST
key.
3. Move the
Rolling Selector
and highlight
Swash
Mix
. Press the
Rolling Selector
to access.
4. Move the
Rolling Selector
until the desired channel
to be adjusted is highlighted.
5. Press the
Rolling Selector,
then rotate left and right to
increase/decrease the
CCPM Travel
values as needed.
6. Follow the same procedure for the remaining channels.
7. To exit the Swashplate Type function, move the
Rolling
Selector
to highlight
LIST
, then press.
[Swash Mix]
3servos
140
o
AILE 60%
ELEV 60%
PIT. 60%
EXP
ACT
