GYRO SENS/Gyro Gain Function
Accessing the Gyro Gain Function
H-28
The X9303 2.4 offers two different types of Gyro Gain
Sensitivity Adjustments: manual or automatic. This
feature gives the user the choice of selecting gyro
sensitivity through the rudder dual rate switch (AUX-2) or
automatically through the flight mode switch. The Gyro
Gain function allows you to have 2 different gyro gain
settings in Manual (RUDD D/R) mode, and 3 separate
gain settings in AUTO Mode.
If the manual (
RUDD D/R
) mode is selected, gain
changes are made manually by the pilot using the
Rudder D/R switch.
If Auto mode is selected, the Gyro gain is automatically
changed by linking directly to the Flight Mode switch.
If you do not intend to use this function, leave this
operation at the factory default position (
OFF
).
1. Place the transmitter switch in the ON position.
2. Press the
LIST
key to enter the
Function mode
.
3. Move the
Rolling Selector
and highlight the
GYRO
SENS
function. Press the
Rolling Selector
to access.
4. Highlight
INH
with the
Rolling Selector
, and then
press to open the options box. Highlight the desired
function type Manual (
RUDD D/R
) or
AUTO
, then
press the
Rolling Selector
to select.
5. Move the
Rolling Selector
to highlight the function
to be adjusted.
6. Press the
Rolling Selector
to select the gain position
to be adjusted, and then roll the
Rolling Selector
to
increase or decrease the gain values as needed.
7. If
AUTO
mode has been selected, once the gain values
for positions 0, 1, and 2 have been set, move the
Rolling Selector
to highlight the mode positions
(
NORM
,
ST-1
, and
ST-2
), and select the gain
position (value) for each mode.
8. To exit the Gyro Gain function, move the
Rolling
Selector
to highlight
LIST
, and press.
[GYRO SENS]◊0
Pos.0 50%
Pos.1 50%
Pos.2 50%
NORM: Pos.0
ST-1: Pos.0
ST-2: Pos.0
AUTO
[GYRO SENS]◊0
Pos.0 50%
Pos.1 50%
RUDD D/R
