JR ProPo XG11MV, Руководство по эксплуатации

Страница: 27 / 136

25
▋ System▋List▋and▋Function▋List
There are two separate areas where settings can be changed - the “System list” and “Function list”.
On the System List, core functions are selected and changed. The Function List allows programming of typical
control settings.
Note that changes made in the System list will effect the parameters visible in the Function List. For example,
choosing the model type as “Helicopter” will mean the Function List will now only display helicopter related settings.
Airplane and Glider settings will not be displayed.
Refer to "Function List" 30 page, "System List" 79 page
▋ ▋ How▋to▋view▋the▋System▋list
1) Move out from Function List
Scroll the dial to the right or left on the Function List, on the second page, there is “SYSTEM LIST” at the bottom,
press the dial to select. System List shall be displayed.
2) Press down and hold the Enter key, then turn on the Main Power. This will lead to the SYSTEM LIST.
3) Pressing down the Dial then turn on the Main Power . This will lead to the SYSTEM LIST.
▋ ▋ How▋to▋view▋the▋“▋FUNCTION▋LIST”
In order to view the Function List, Press down the List key.
Dial
Dial
Enter Key
Model No. Model No.
Model Name Model Name
Timer 1
Timer 2
Timer 3
Flight Mode Flight Mode
Receiver Power Source Voltage Receiver Power Source Voltage
Transmitter Power
Source Voltage
Transmitter Power
Source Voltage Integrated Timer Integrated Timer
Trim Position Display Trim Position Display
Helicopter
Glider
Airplane
Model Type Display
In the situation where the Timer has been set, this will be
displayed. This Timer can be started and stopped using
the Function button, and can be reset using the CLR key.
Displays the Trainer condition Displays the Trainer condition
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
Change to System List Change to System List
Pressing down the Dial then
turn on the Main Power.
Pressing down the Dial then
turn on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Press List key Press List key
Functions▋Common▋to▋All▋Models
Dial
Dial
Enter Key
Model No. Model No.
Model Name Model Name
Timer 1
Timer 2
Timer 3
Flight Mode Flight Mode
Receiver Power Source Voltage Receiver Power Source Voltage
Transmitter Power
Source Voltage
Transmitter Power
Source Voltage Integrated Timer Integrated Timer
Trim Position Display Trim Position Display
Helicopter Glider Airplane
Model Type Display
In the situation where the Timer has been set, this will be
displayed. This Timer can be started and stopped using
the Function button, and can be reset using the CLR key.
Displays the Trainer condition Displays the Trainer condition
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
Change to System List Change to System List
Pressing down the Dial then
turn on the Main Power.
Pressing down the Dial then
turn on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Press List key Press List key
Dial
Dial
Enter Key
Model No. Model No.
Model Name Model Name
Timer 1
Timer 2
Timer 3
Flight Mode Flight Mode
Receiver Power Source Voltage Receiver Power Source Voltage
Transmitter Power
Source Voltage
Transmitter Power
Source Voltage Integrated Timer Integrated Timer
Trim Position Display Trim Position Display
Helicopter
Glider
Airplane
Model Type Display
In the situation where the Timer has been set, this will be
displayed. This Timer can be started and stopped using
the Function button, and can be reset using the CLR key.
Displays the Trainer condition Displays the Trainer condition
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
Change to System List Change to System List
Pressing down the Dial then
turn on the Main Power.
Pressing down the Dial then
turn on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Press List key Press List key
Dial
Dial
Enter Key
Model No. Model No.
Model Name Model Name
Timer 1
Timer 2
Timer 3
Flight Mode Flight Mode
Receiver Power Source Voltage Receiver Power Source Voltage
Transmitter Power
Source Voltage
Transmitter Power
Source Voltage Integrated Timer Integrated Timer
Trim Position Display Trim Position Display
Helicopter
Glider
Airplane
Model Type Display
In the situation where the Timer has been set, this will be
displayed. This Timer can be started and stopped using
the Function button, and can be reset using the CLR key.
Displays the Trainer condition Displays the Trainer condition
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Servo Hold is operating,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
In the situation where
Throttle Trim is in Memory,
this will be displayed.
Change to System List Change to System List
Pressing down the Dial then
turn on the Main Power.
Pressing down the Dial then
turn on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Pressing down the
Enter key then turn
on the Main Power.
Press List key Press List key