13
13
13
13
and Rudder channel dual rate values will be switched between the settings
available on screen for those flight modes. To activate ADR please enable the
flight mode switch in the
device select
menu, and then set the D/R function
to FM (Flight Mode).
Typical dual rate settings are as follows
:
Dual Rate Switch Position
0 Position (reduced servo travel, for hovering e
.g. 80% D/R, 20% EXP
)
1 Position (maximum servo travel, for aerobatics e
.g. 100% D/R, 10% EXP
)
Reverse Switch
The PCM9X features a servo reverse function. This allows the user to electronically
reverse the direction of a channel. Servo reversing is available for all 9 channels of
the PCM9X. In Function Mode, use the scroll bar to select Reverse Switch and
enter by pressing the scroll bar.
Sub Trim
The sub trim function allows you to individually fine tune the centring of all 9
channels on the PCM9X within a range of + or - 125% (+ or - 30 degrees
servo travel). It is not a good idea to use excessive sub trim as you can
eventually overrun the maximum travel of your servos.
In Function Mode, use the scroll bar to select Sub Trim and access by pressing
the scroll bar.
