Preparation for testing
For two days prior to the tests, the patient should discontinue taking any restorative preparations, drinks or medications. It is also
recommended that the patient does not drink or eat for two hours before the tests. It is desirable that the patient relax for about 15 minutes in
the comfortable atmosphere before the testing commences.
Testing should not be carried out in near sources of high frequency electromagnetic fields (such as cell phones, pagers, microwave ovens,
TVs, irons, etc.). The patient must remove any jewelry, glasses, and watches. During examination, the patient should sit or lie down
comfortably.
!
NOTE! During the tests, the operator must not touch the patient with both
hands at the same time.
To enter the FOLL program, switch on the device, plug in the diagnostic electrodes to the corresponding port and press F
button.
!
NOTE! The patient must hold the passive electrode in the hand opposite the
side being tested (for example, while testing the left hand or the left foot, the
passive electrode must be placed in the right hand of the patient and vice
versa).
Express Assessment of the Functional State of Energy Meridians
Before each application the tip of the electrode must be moistened by a water-soaked cotton-wool pad. Place the electrode
on the projection of the measurement point, gradually increasing the pressure until stable figures appear on the display
screen. Write down the obtained measurements in the special form.
Содержание DiaDENS-DT
