::
CHAPTER 3
THERAPEUTIC CAPABILITIES
AND FUNCTIONING MODES
OF DIADENS DEVICES
1. THERAPY PROGRAM
The THERAPY program is intended for emergency aid, the elimination of acute sources of complaints, and treatment of
acupuncture points, using in-built and external electrodes for THERAPY of points or zones, and paraorbital electrodes.
The THERAPY program in the device operates at frequencies of 20, 60,77,140, and 200 Hz. For recommendations
concerning the choice of therapeutic frequencies see "
Ranges of Energy exposure and Their Selection
of Electricimpulse and Their Selection
In order to set the mode of the THERAPY program, carry out the following steps:
Switch the device on.
Select the frequency of 20, 60, 77, 140, or 200 Hz, pressing FR to increase the frequency, and FREQUENCY -
to decrease the frequency. When the device is switched on, the automatic frequency value is set at 77 Hz. If the intention is
to use the in-built electrode, place the electrode on the relevant zone. When operating external electrodes for points or
zones, insert one of the electrodes into the corresponding socket on the right-hand side of the device, and place the electrode
onto the skin.
Select the power of influence as shown in the section entitled "Range of Energy exposure and Their Selection" (
).
The duration of treatment in the THERAPY program application in the direct projection of pain or functional disease is
determined by the patient's reaction:
- the complaint subsided fully;
- the patient feels considerably better;
- the skin under the electrode becomes bright red, the patient experiences a feeling of "gooseflesh", warmth or lightness;
- the patient falls asleep.
The duration of influence on latent
s amounts to 1 to 5 minutes.
Содержание DiaDENS-DT
