MANUAL DE INSTRUCCIONES CODIGO 80243 REV A Enero /11
(Sujetas a modificaciones sin previo aviso) Pag.: 44
J
.P. SELECTA s.a.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: [email protected] - website: http://www.jpselecta.es
(Fig. 27)
Move the cursor on the unit you need, then press
[ENTER]
. You can also press the
number ahead of the unit directly by means of the numeric keypad.
Press
[RETURN]
to go back to the pre-testing screen.
Blank
Pull the blank solution cuvette into the light path, and then press
[ZERO]
.
Test and Print
Pull the unknown concentration sample into the light path, then press
[START]
, and
it will enter the testing screen. Press
[START]
again, you’ll get the concentration of
the sample. (Fig. 28)
The operation is the same if you have more samples to test.
Press
[PRINT]
to print the test results. All the data will be deleted after printing.
You can also delete the test results by pressing
[CLEAR]
.
6.3 Kinetics Mode
Move the cursor onto
Kinetics
by pressing
[»]
and
[«]
in the main menu, then press
[ENTER]
to go into kinetics pre-testing screen. (Fig.29)
Figure 27
Figure 28
Figure 29
