INSTRUCTION MANUAL CODE 80243 REV A
January/11
(It can be modified without notice)
Page: 45
J
.P. SELECTA s.a.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: [email protected] - website: http://www.jpselecta.es
Set Wavelength
Press
[GOTO]
in the kinetics pre-testing screen, and input the testing wavelength
by pressing the numeric keypad (Fig.30).
Set Parameters
Press
[SET]
in the kinetics pre-testing screen, and 5 parameters should be set before
testing. (Fig. 31)
Set Time Interval
Move the cursor on
Time Interval
by pressing
[»]
and
[«]
, followed by
[ENTER]
.
(Fig.32)
Input the new interval time by pressing the numeric keypad followed by
[ENTER]
, and it will return the kinetics setting screen.
Note:
1. The range of time interval is 1-200, other value is invalid.
2. If you don’t want to change the value, press
[RETURN]
directly.
Set Total Time
Figure 32
Figure 30
