INSTRUCTION MANUAL CODE 80243 REV A
January/11
(It can be modified without notice)
Page: 49
J
.P. SELECTA s.a.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: [email protected] - website: http://www.jpselecta.es
7.2 Set W Lamp
Move the cursor onto
W Lamp on/off
by pressing
[»]
and
[«]
in utility
setting screen, and then press
[ENTER]
to go into W lamp controlling screen. (Fig. 43)
Move the cursor on
OFF
to shut off the W lamp by pressing
[»]
and
[«]
followed by
[ENTER]
. The icon ”
” will also be displayed at the end of
OFF
.
Press
[RETURN]
to exit.
Move the cursor onto
On
to lighten the W lamp by pressing
[»]
and
[«]
followed by
[ENTER]
. The icon ”
” will also be displayed at the end of
ON
. Press
[RETURN]
to exit.
Shutting off W lamp is strongly recommended when you don’t use it after self-testing.
7.3 Set Printer
Move the cursor onto
Printer
by pressing
[»]
and
[«]
in utility setting screen, and
then press
[ENTER]
to go into printer setting screen. (Fig. 44)
Move the cursor on
Printer Style
by pressing
[»]
and
[«]
in printer setting screen,
and then press
[ENTER]
. (Fig. 45)
If your printer is outside the instrument, choose
Table Style
in the down display of
Fig. 45; and if your printer is inside your instrument, choose
Panel Style
.
Move the cursor onto
Scroll Paper
by pressing
[»]
and
[«]
in the printer setting
screen and then press
[ENTER].
Repeat the operation, till the new changed paper
spread out.
Move the cursor onto
Reset
by pressing
[»]
and
[«]
in the printer setting screen
and then press
[ENTER]
. The printer will be reset.
7.4 Set Time & Date
Move the cursor on
Time and Date
by pressing
[»]
and
[«]
in the utility setting
screen, and then press
[ENTER]
to go into time and date setting screen. (Fig. 46)
Figure 45
Figure 43
Figure 42
