3
139262 Rev_H
9 / 11 / 2012
Standards
The Jøtul F
50
TL wood stove has been tested and listed
to: U.S: ANSI/UL 1482 and ANSI/UL 737
Canada: CAN/ULC-S627-M93
Tests performed by:
ITS, Intertek Testing Services
Middleton, WI
Manufactured by:
Jøtul North America
55 Hutcherson Drive
Gorham, Maine 04038-2644
The Jøtul F
50
TL Rangeley wood stove meets the U.S.
Environment Protection Agency’s Emissions limits for
wood heaters manufactured and sold after July 1, 1990.
Under specific, limited laboratory tests, this heater
has shown heat output at rates ranging from 11,700
to 32,900 BTU’s per hour. Actual heat output will vary
depending upon fuel type and quality, home design,
climate, environment, operation, and chimney function.
The Jøtul F
50
TL wood stove is only listed to burn solid
wood only. Do not burn any other fuels.
Read this entire manual before you install and use your
new Jøtul F
50
TL wood stove.
Save these instructions and make them
available to anyone using or servicing the
stove.
Check Building Codes
When installing, operating and maintaining your
Jøtul F
50
TL woodstove, follow the guidelines
presented in these instructions, and make them
available to anyone using or servicing the stove.
Your city, town, county or province may require
a building permit to install a solid fuel burning
appliance.
In the U.S.,
the National Fire Protection Association’s
Code, NFPA 211,
Standards for Chimneys, Fireplaces,
Vents and Solid Fuel Burning Appliances
, or similar
regulations, may apply to the installation of a solid
fuel burning appliance in your area.
In Canada
,
the guideline is established by the CSA
Standard, CAN/CSA-B365-M93,
Installation Code for
Solid-Fuel-Burning Appliances and Equipment.
Always consult your local building inspector or
authority having jurisdiction to determine what
regulations apply in your area.
The Jøtul F 50 TL is approved for use in mobile homes.
Install in accordance with 24 CFR, Part 3280 (HUD).