Jonix duct 70MIC2C, Руководство по эксплуатации и обслуживанию

Страница: 21 / 32

21
JO NIX
duct
10
11
Fig. 10: Reposition the device
JO NIX
duct
by inserting the ionising tubes horizontally
into the specific hole using the handle and
screw in the 4 screws which secure the
brackets to the wall.
Fig. 11: Reinsert the power supply plug
and all other plugs in the appropiate sockets
of the
JO NIX
duct
module.
Switch on the moduleby turning the On/Off
switch to I.
Verify the functioning of the device, it has to
be hear a light sizzle coming from the tubes.
Reset the alarm reporting
through corresponding
entrance.
Failure to clean the ionising tubes leads to a drop in system performance.
Clean the outside of the device with a damp cloth.
7.2.2 External cleaning of the equipment
Do not use liquid cleaners or sprays, soap or the like.