Jonix duct 70MIC2C, Руководство по эксплуатации и обслуживанию

Страница: 13 / 32

13
JO NIX
duct
JO NIX
duct
70MIC2C
The device
JO NIX
duct
is designed to be secured directly onto the surface in contact with the
air to be treated, using specific brackets. Therefore, that surface must be provided with a 175 mm
x 120 mm rectangular hole and holes for applying the screws, as indicated in the dimensional
drawing attached to the device.
6.4 INSTALLING THE DEVICE
Easy to install in any ductwork and with any material.
JO NIX duct
devices – thanks to their adaptability and to their space-saving designs - can be
easily fixed on either side of the duct. All you need is an opening on a wall (in horizontal or vertical
position): the device can be fastened using the eyelets supplied as standard.
APPLICATION ON TOP AIR
CONDUCTOR
APPLICATION ON LOWER AIR
CONDUCTOR
APPLICATION ON VERTICAL AIR
CONDUCTOR
Fastening example of the
JO NIX duct
module on ventilation pipes.
IMPORTANT:
With tissues duct, provide an attachment plenum in installation phase of the
JO NIX
duct
device.
Ventilation
channel