Jonix duct 70MIC2C, Руководство по эксплуатации и обслуживанию

Страница: 10 / 32

10
JO NIX
duct
5 - RECEPTION, TRANSPORT AND STORAGE
JO NIX
duct
and its accessories are delivered in specific protective packaging and must remain
intact until they are assembled. The materials that were not installed for technical requirements are
supplied with suitable enclosure secured to the inside or outside of the device itself. The package
includes:
- N° 1
JO NIX
duct
Ductable Ionising Module.
- N° 1 power supply connector, n° 2 serial connectors.
- Operating and maintenance manual.
- Declaration of Conformity.
- Warranty conditions.
5.1 PACKAGING
Any type of complaint must be sent in writing within eight days from receiving the
goods.
When you receive the device please check all its parts, in order to make sure that it has not been
damaged during transport.
Any damage must be reported to the carrier, by filling in the relevant section on the delivery note
and specifying the type of damage.
5.3 INSPECTION UPON RECEPTION
The Manufacturer disclaims any liability for damage due to incorrect unloading
failure to protect the device from the elements.
In the event of extended storage keep the devices away from dust and sources of vibration and
heat.
5.4 STORAGE
5.5 HANDLING DEVICE IN OPERATING CONDITIONS
We recommend you the highest attention in handle the plasma generators uin the
device.
JO NIX
duct
device is easy movable in various environments, because it is provided with handle
and reduced clearances (see Chapter 4 "Technical Data").
5.2 HANDLING AND TRANSPORT
To handle the device use appropriate means, depending on the weight, as required
by Directive 89/391/EEC and subsequent amendments.
Please take great care while unloading and positioning the devices, to prevent
damaging the casing or components. Avoid uncontrolled rotations.
The weight of every single device is given in this manual.