background image

t o   e n s u r e   p a c k a g e   c o u l d   b e   p l a c e d  
horizontallyandstably.Supportive tool 
should be used when disassembling the 
carton to prevent the modulesfromfalling
 down.

4.1.5

         Each module should be lifted by 2 man. 
Do not lift module by grasping the module
terminal box or lead wires. Use both hands 
to carr y module, do not stack modules 
during lifting.

4.1.6

         The unpacked modules must completely 
be assembled and prohibited from being 
stacked at the project site.

5.0

Installation

         Double glass modules produced by 
Jolywood could work for more than 30 years 
under proper conditions. Modules with an 
expired life should be reasonably disposed 
in accordance with local laws and regulations. 
Besides requirement of IEC certification, 

4.2.4

         Modules removed out of package are 
prohibited from leaning against a without 
reliable support or an unfixed object

4.2.3

         When removing modules from package, 
two man stand must stand on each side of 
the box while lifting the module, one hand 
grasping the corner of the module, the other 
hand grasping the short side of the module. 
When unpacking on a horizontal floor, remove 
modules from one side to the other side of 
package, and then carry them. If unpacking 
on a non-horizontal floor, use a supportive 
tool to ensure package placed verticality.

4.2.2

         When unpacking, cut all vertical packing 
belts with a blade or scissors, first cut the 
long side packing belt, then cut the short 
side packing belt; remove the upper cover 
of the carton and take out two or three upper 
lifting brackets.

4.2    Unpacking steps

4.2.1

         Before unpacking, please check the 
product name and serial number on an A4 

paper onthesurface of the package, unp-
acking method should not be randomly 
changed.

4.1.4

        Module information could be queried from 
outer package, please read it carefully before
unpacking.

4.1.3

         W e a r   p r o t e c t i v e   g l o v e s   d u r i n g  
unpacking to avoid injury and fingerprints 
on the glass surface.

7

Jolywood (Taizhou) Solar Technology Co.,Ltd.

Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China

www.jolywood.cn

 [email protected]

 +86-523-8061 2361

Installation Manual

 - Jolywood N-type Mono-crystalline Double Glass Module

Содержание JW-HD108N

















Отзывы: