2.3 operation instruction
2.3.1
3.0
Unload, Transportation and Storage
2.2.2
2.3.2
2.3.3
2.3.4
2.2.3
2.2.4
2.2.5
4
Jolywood (Taizhou) Solar Technology Co.,Ltd.
Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China
www.jolywood.cn
+86-523-8061 2361
Preventive measures and general safety rules:
Modules should be stored in the original
box before installation. Please protect the package
from damage. Transport the modules and unpack
It is forbidden to climb, step on, stand, walk
or jump directly on the package or module.
Only work in a dry environment, and only use
dry tools. Do not work in a humid environment
without wearing any protective measures. When
exposed under the sun, no matter whether module
is connected or not, please do not directly touch
junction box, connector, cable or other charged
objects of module without any protection.
Please do not use water to extinguish fire
when the power is on.
Do not install or operate modules during
wet or windy weather.
In order to avoid damage module, please
do not scratch or hit module, and do not use
paint or adhesive on the front or back side of
module. In order to ensure insulation performance
of modules from be damaged, please avoid
scratching, cutting the cables and connectors or
exposed under the sun for a long time. Do not
drop module or drop other things onto the module
surface. Do not place any heavy or sharp objects
on the module surface.
According to the National Electrical Code,
the maximum system voltage shall not exceed 1500V.
Do not connect the positive terminal of a
single module to the positive terminal of another
module. Please make sure that the polarity of
each module or module string is not opposite to
other modules or module strings. Please make
sure that there are no gaps between the insulating
washers of the joint. If there are gaps between
the insulating washers, it may cause the risk of
fire or electric shock.
The operator of the system requires
relevant professional knowledge, and the
system must be installed and maintained by
qualified person with professional knowledge.
Persons without authorization and relevant
training should not touch modules and
approach the installation area or module
storage area.
It is strictly forbidden to use modules with
broken glass. Damaged modules must not be
repaired. Contact with the surface of the modules
may cause electric shock. Do not disassemble
the module or remove any part of the module.
Do not artificially gather sunlight on these solar
modules.
Installation Manual
- Jolywood N-type Mono-crystalline Double Glass Module
