Jolly Mec TERMOJOLLY 80 EVO, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 44

12
CAP.05 DESCRIPTION
05.1 PRODUCT PRESENTATION
Jolly-Mec products are the result of experience in the wooden biomass
combustion sector; they are designed and engineered to meet the increasing
demands of today’s markets with high performance levels and savings
enveloped in a modern design
TERMOJOLLY 80 EVO fireplaces are wood-fired monoblocs with intermittent
loading and approved according to European standard EN13229.
The fireplaces are made up of a steel heat exchanger whose particular
construction allows to make the most of the heat produced by combustion.
They feature the possibility of suctioning combustion air from both outside
and inside the home if there is no possibility of an alternative installation. The
accurate design and engineering of the device has reduced the installation
masonry work to a bare minimum.
The fireplaces are characterized by a combustion chamber in refractory
material that not only improve the aesthetic aspect, but also guarantee the
temperature of the chamber reducing polluting emissions.
The fireplaces are equipped with a ceramic glass door with vertical sliding/
hinge and with the possibility of hinged opening.
Combustion has been optimised to guarantee consistent reloading.
To prevent fumes from escaping during the reload phases, the device
features a system which, when the door opens, opens a preferential route for
the combustion fumes increasing the draught.
Section A-A
Section B-B
A A
B
B
33
4
58
8
57
8
907
15
00
60
0

270
740
41
0,
5
600
15
00
33
4
58
8
57
8
TERMOJOLLY 80 EVO
(with vertical sliding)
TERMOJOLLY 80 EVO
(with hinged opening)