6
In the event of a malfunction or intervention request by a specialised Technical Service Center, the user must be
able to demonstrate the use of fuel with the characteristics required by this manual.
The Manufacturer disclaims all liability concerning anomalies or malfunctions caused by use of FUEL which does not
comply with the recommended requirements.
NOTE
01.4
USE AND STORING OF THE INSTALLATION AND MAINTENANCE MANUAL
•
Recipients of the manual
The use and installation manual is addressed to users responsible for the installation, operation and maintenance of the stove; particular
attention must be given the parts of the manual concerning safety.
If the product is subsequently resold, the user is requested to hand over this sheet and to inform the manufacturer of the name of the
new owner, so that the latter may receive any updates issued.
•
Scope of the manual
The manual contains information on the correct use of the product in accordance with the purposes for which it was designed and built.
It also provides information about loads, commissioning, repair and maintenance of the stove in conformance with the limits set down
by the manufacturer.
•
Conservation of the manual
The installation and maintenance manual is an integral part of the product and must be conserved up to the time when the stove is
dismantled. It must be kept in a protected, dry place out of direct sunlight and near the product so that it is always readily available for
consultation.
Should the manual get damaged, the user must request a copy from the retailer where he purchased the appliance. When requesting
assistance, always make reference to the MODEL, LOT and SERIAL NUMBER indicated on the label shown in
CHAP.05.2 - PRODUCT
IDENTIFICATION
.
•
Updating the manual
The installation and maintenance manual reflects the status of the technology at the time the product was marketed. The manufacturer
reserves the right to make modifications to the product, and consequently the relative manual, without any obligation to update previous
editions.
01.5
MANUFACTURER’S LIABILITY AND WARRANTY CONDITIONS
Upon the delivery of this manual, Jolly Mec S.p.A. cannot be held liable, whether civil or criminal, for accidents due to partial or total
non-compliance with the specifications herein contained.
The manufacturer is especially held harmless from any liability in the following cases:
•
Improper use of the product
•
Use not intended by specific national regulations
•
Incorrect installation
•
Faults in the electrical connections, the connections of the fume exhaust system and/or the comburent air ducting system e and in
plumbing connections
•
Failure to carry out maintenance as prescribed in this manual
•
Unauthorised modifications or operations
•
Use of replacement parts that are non-original or not specific to the model
•
Total or partial failure to follow the instructions
•
Exceptional events (e.g.: breakages due to natural or accidental events as lightening, short circuits etc.)
•
Damage caused by electrical power cuts, sudden fluctuation of supply voltage, electromagnetic fields
•
Use of fuel with characteristics other than those recommended in this manual
In the above cases the warranty is void.
Please refer to Annex
SM083
for details on the warranty conditions and compiling the relative certificate.
Содержание QL10
Страница 31: ...ENGLISH NOTES 31...