background image

12

 CHAP.05  DESCRIPTION

 

05.1 

PRODUCT PRESENTATION

Jolly-Mec products are the result of over forty years experience in the wooden 
biomass combustion sector; they are designed and engineered to meet the increasing 
demands of today’s markets with high performance levels and savings enveloped in 
a modern design.

The QL10, TL10, QL15 and TL15 stoves are monobloc wood operated systems 
with intermittent kind of combustible charging modality

    approved  to  European 

Standard EN 13240.

The QL10, TL10, QL15 and TL15 stoves are high-performance products optimised 
for new installations. They feature the possibility of suctioning combustion air 
from both outside and inside the home if there is no possibility of an alternative 
installation.
The QL10, TL10, QL15 and TL15 stoves also feature a combustion chamber 
in  Fireflector  HD  which,  in  addition  to  improving  the  aesthetic  appearance,  also 
contributes to guaranteeing a high chamber temperature level hence reducing 
polluting emissions.
The exchange part was designed to guarantee the utmost heat recovery, which 
can be thus conveyed to the surrounding room by radiation. Combustion has been 
optimised to guarantee consistent reloading (about 45 min).
The QL10, TL10, QL15 and TL15 stoves are equipped with a door to avoid 
combustion product from exiting, with self-cleaning glass.

QL15

TL15

QL10

TL10

Содержание QL10

































Отзывы: