Jolly Mec FOGHEA, Инструкция по установке, использованию и обслуживанию

Страница: 7 / 48

7
1.4 Dimensions and parts
The stove is supplied with a JOLLY ME07 F burner and preassembled and tested pellet hopper, in two wooden crates on pallets, packed
with a cellophane hood, polystyrene and with the following parts:
• Use, maintenance and assembly card
• Standard pellet hopper with 46 kg capacity
• Control panel with SIMPLIFIED electronic controller
• Ø 100 mm flexible aluminium pipe 3 m long for ducting hot air
• 2 Ø 100 mm connections for ducting hot air
• Plastic container for filling the humidifier
• Ø 120 mm flexible pipe 100 cm long (extensible) for hot air fan suction from the outside.
• Ø 80 mm flexible pipe 50 cm long (not extensible) for burner fan suction from outside
• Ø 80 mm flexible pipe 100 cm long (extensible) for primary combustion air suction from outside (Caldo Control)
• JOLLY ME07 F pellet burner
• Boiler body (combined air heating Foghet)
• Room temperature probe
• Wood guard (on curved front model only)
• Adjustable grilles for hot air
• Ø 100 mm pipe clamps
•
Wrench for burn pot locking screw
• Room thermostat (optional)
• Fogo or Foghea cladding
Cleaning tools supplied (see chap. 1.11 )
• Burn pot cleaning tool
• Poker
• Shovel
• Flue brush
• Cleaning brush
OPTIONALS
OPTIONAL SET for curved front models
• Holder for accessories and removable inner door
• Removable door
• Spring
• Foghet with straight front • Foghet with curved front